 |
|||
|
ipcw.com
|
|||
 |
||
 |
|||
 |
|||
| Twist & unlock factory wire harness from factory 3rd brake light. |
 |
||
|
||
 |
|||||
 |
|||||
 |
|||||
| INSTRUCTIONS | LED3-500C-A, CB-A, CS-A |
|
||||||||||||||||||||||||||||
| 99-09 F-SUPER DUTY | L.E.D. MEGA 3RD BRAKE LIGHT | |||||||||||||||||||||||||||||
| Your new IPCW MEGA L.E.D. 3rd Brake Light is a quality-made product that will work beautifully on your vehicle. Please refer to the | ||||||||||||||||||||||||||||||
| pictures below for installation. | ||||||||||||||||||||||||||||||
| 1. |
|
2. |
|
3. |
|
4. |
|
|||||||||||||||||||||||
| Remove factory 3rd brake light using a Phillips screwdriver. Keep screws for Step 6. |
|
Remove all light bulbs from factory sockets. Keep factory wire harness to use on MEGA. | Take (IPCW) MEGA 3rd brake light out of box. It is a 2-piece unit that needs to be unscrewed in the next step. | |||||||||||||||||||||||||||
| 5. |
|
6. | 7. | 8. |
|
|||||||||||||||||||||||||
| Use a Phillips screwdriver & remove (4) screws to separate the LED BAR from the BASE. | Place the BASE onto the truck and use factory screws kept from Step 1 to secure it. | Make sure that BASE is aligned straight with the body of the truck. | Plug the MEGA light connectors into factory sockets. Make sure to match Black wire to Black wire with factory sockets. | |||||||||||||||||||||||||||
| 9. |
|
10. |
|
11. |
|
12. |
|
|||||||||||||||||||||||
| Twist & lock the sockets into MEGA light socket holes. | Reconnect the factory harness plug to the vehicle plug. | Push the wires gently into the cab of the truck and align the LED BAR with the BASE. | Reinstall the LED BAR to the BASE. | |||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| Done! Thank you for your purchase | ||||||||||||||||||||||||||||||
| We hope you enjoy your new IPCW | ||||||||||||||||||||||||||||||
| L.E.D. MEGA 3rd Brake Light. | ||||||||||||||||||||||||||||||