READ ME FIRST! Installation Instructions
LEDT-1009C, CB, CS 05-09 FRONTIER
LED TAIL LIGHTS
1.
2.
3.
Unscrew the stock tail light.   Twist & unlock sockets from factory taillights. Remove all stock bulbs.
4.
5.
6.
Continue Step 3. TakeIPCW LED tail lights out from box. The brown socket is a 3-wire socket. The gray socket is a 2-wire socket.
CAUTION:  Install Driver's Side Tail Light First!
7.
8.
9.
The top socket hole is a 3-wire plug and the bottom hole is 2-wire plug. Connect 3-wire plug into 3-wire socket. Make sure that black wire matches with (Gray) wire. Connect 2-wire plug into 2-wire socket. Make sure the black wire is matching with the (Black) wire.
Next, install the Passenger Side!
10.
11.
12.
Do not remove reverse light bulb. Then twist & lock socket into the light. Connect 2-wire plug into 2-wire socket. Make sure the black wire is matching with the (Brown) wire.  Connect 3 wire plug into 3 wire socket. Make sure that black wire is matching with the (Purple) wire.
13.
14.
15.
Before reinstalling make sure that all the wires are matching correctly. Twist & lock sockets into place. Make sure that all the sockets are in the right places.
16.
Rounded Rectangle: Picture shown: Crystal Eyes L.E.D. MEGA 3rd Brake Light LED3-1009C-A & Crystal Eyes L.E.D. tail lights LEDT-1009C.
Done!  Thank you for your purchase.  We hope you enjoy your new Crystal Eyes L.E.D. Tail Lights.
Rounded Rectangle: Need Technical Support? If the vehicle experiences any of the following conditions after you have done these procedures, please feel free to contact us at (323)838-5588. You will be able to speak with Technical Support Dept. Or if you prefer, you can e-mail us at technical@inprocarwear.com . We will be more than happy to provide you with the help you need. 1. The warning lights on the dashboard lights up (for example: ABS, Cruise Control, or maintenance lights). 2. The turn signals flash much rapidly than normal.