INSTRUCTIONS | LEDT-346C,CB,CR,CS |
|
|||||||||||||||||||
06-09 H3 | LED TAIL LIGHTS | ||||||||||||||||||||
Your new IPCW L.E.D. TAILLIGHT are quality-made products that will work beautifully on your vehicle. Please refer to the | |||||||||||||||||||||
pictures below for installation. | |||||||||||||||||||||
1. | ![]() |
2. | ![]() |
3. | ![]() |
4. |
|
||||||||||||||
Open liftgate to remove the screws on stock tail lights. Keep the screws for Step 10. | Remove stock tail light. | Twist open the sockets on the back of stock light. | Remove and discard ONLY the light bulb from the Running light. (the top socket) | ||||||||||||||||||
5. | ![]() |
6. | ![]() |
7. | ![]() |
8. |
|
||||||||||||||
Keep the bulb on the reverse light connected. | Take (IPCW) L.E.D. Taillight out from box. | Gently pull out the Running light connector from LED taillight. | Plug this connector to vehicles Running light socket. Make sure to match up the wires match (Black to Black). | ||||||||||||||||||
9. | ![]() |
10. | ![]() |
11. | ![]() |
||||||||||||||||
Twist in both sockets from the vehicle wiring harness and make sure they are sealed. | Make sure the light functions properly, then install the screws kept from Step 1. | ||||||||||||||||||||
![]() |
|||||||||||||||||||||
Done! Thank you for your purchase. We hope you enjoy your new IPCW LED TAILLIGHTS. | |||||||||||||||||||||
(Show with LEDT-2038CR Ruby Red) | |||||||||||||||||||||
![]() |
|||||||||||||||||||||