INSTRUCTIONS | LEDT-561C,CB,CS |
|
||||||||||||||||||||||||||
08-UP SUPER DUTY | LED TAILLIGHTS | |||||||||||||||||||||||||||
08-UP F250 HD, F350, F450, F550 | ||||||||||||||||||||||||||||
Your new IPCW L.E.D. Taillights are quality-made products that will work beautifully on your vehicle. Please refer to the | ||||||||||||||||||||||||||||
pictures below for installation. | ||||||||||||||||||||||||||||
1. |
|
2. |
|
3. |
|
4. |
|
|||||||||||||||||||||
Pull down tailgate and remove 10mm screws from both sides. | Very gently, pull light away from bed of truck. Twist & unlock Reverse Light socket at the top. Don't remove the bulb. | Twist & unlock Running Light socket at the bottom. | Remove the light bulb from Running Light socket. | |||||||||||||||||||||||||
5. |
|
6. |
|
7. |
|
8. |
|
|||||||||||||||||||||
Plug the top IPCW LED light connector into factory Running Light socket. | Make sure to match (black to black wire) when connecting to factory plug. | Twist & lock socket into IPCW taillight. | There are 2 socket adapters included in the box. | |||||||||||||||||||||||||
9. |
|
10. |
|
11. |
|
12. |
|
|||||||||||||||||||||
Twist & lock socket adapters to IPCW Reverse Light socket hole at the bottom. Twist tightly to seal the light. | Twist & lock Reverse Light socket into IPCW taillight. | Check to make sure sockets are secured. Then, gently pushed the IPCW taillight in on vehicle. | Make sure the light is popped in. Tighten 10mm screws on both sides. Test to ensure all functions are working. (Brake, Turn & Running) | |||||||||||||||||||||||||
13. |
|
|||||||||||||||||||||||||||
Done! Thank you for your | ||||||||||||||||||||||||||||
purchase. We hope you enjoy | ||||||||||||||||||||||||||||
your new IPCW LED taillights. | ||||||||||||||||||||||||||||
(Shown in Crystal Clear #LEDT-561C) | ||||||||||||||||||||||||||||